nPro
Navigation

5GDHC network in Königsmoos (Kirchfeld)

On this page you find facts and figures about the 5GDHC network in Königsmoos (Kirchfeld). The network has a length of 1.3 km. In total, 32 buildings are supplied by the heat network. The 5GDHC network is operated by Bürger-Energie-Gen. ND-SOB-AIC-EI .

Facts and figures about the cold heat network in Königsmoos (Kirchfeld)

Geothermal probes, which are one of the most common heat sources for 5GDHC networks, serve as a heat source in this district. Uninsulated plastic pipes are used for the heating network. The network does not only supply the buildings with heat to operate the decentralized heat pumps, but also with cooling energy, e.g. for room air conditioning. If heating and cooling demands occur simultaneously, these can be balanced within the 5GDHC network (see also demand balancing in 5GDHC networks). The district comprises new construction areas only. Every building of the district is free to decide whether to connect to the heating network or not; there is no obligation to connect. Detailed data of the 5GDHC network in Königsmoos (Kirchfeld) is listed in Table 1.

Table 1: Facts and figures about the anergy network in Königsmoos (Kirchfeld)
DistrictKirchfeld
CountryGermany
City / locationKönigsmoos
Year of commissioning2023
OperatorBürger-Energie-Gen. ND-SOB-AIC-EI
Network temperatures16 °C
Supplied buildings32
Network length1.3 km
Share of new building area100 %
Heat generation capacity (energy hub)270 kW
Pipe typePlastic pipe (uninsulated)
Heat sourcesGeothermal probes
Cooling supply through thermal networkYes
Obligation to connect to networkNo
Owner of decentral heat pumpsHeat network operator
Billing boundary for delivered heatCondenser of the heat pump (building side)
Price model for heat supplyBase price (€/year) Energy price (€/kWh)
Price model for cold supplyBase price (€/year) Energy price (€/kWh)
Buildings receiving compensation for heat feed-inNo