Technologies: Cost and price overview

District heating network

The material and installation costs per meter of a district heating network vary significantly depending on the type of network and the environment in which it is laid. Generally, the following tables distinguish between 5GDHC networks and conventional district heating networks. Additionally, installation costs are differentiated by urban/paved surface, suburban/semi-paved surface, and rural/unpaved surface to account for the varying installation and excavation requirements that play a central role in costs.

5GDHC network with uninsulated plastic pipes

The pipe cost values are taken directly from the price list for PE 100 plastic pipes by the German company Frank. These are data for standard pipes of the class SDR 11 (page 12). Data was interpolated and extrapolated using derived approximation formulas. The values for installation costs were derived from the Technology Catalogue of KEA Baden-Württemberg and interpolated and extrapolated linearly using derived approximation formulas. Additional cost parameters include a 50-year lifetime and operation, maintenance, and repair costs of 1 % of the investment costs.

Pipe costs in $\frac{EUR}{m}$ with DA as nominal diameter in mm:

Pipe costs are considered the same for rural, suburban, and urban areas.

Installation cost (Rural Area, Unpaved Surfaces) in $\frac{EUR}{m}$ with DA as nominal diameter in mm:

Installation cost (Suburban Area, Semi-Paved Surfaces) in $\frac{EUR}{m}$ with DA as nominal diameter in mm:

Installation cost (Urban Area, Paved Surfaces) in $\frac{EUR}{m}$ with DA as nominal diameter in mm:

Low-temperature network with insulated pipes

The values for pipe costs were taken from the TCO online tool by Logstor for KMR pipe pairs for the variant s.2 and interpolated and extrapolated polynomially using derived approximation formulas. The values for installation costs were derived from the Technology Catalogue by KWW. The total costs (materials and installation) provided there were linearly interpolated and extrapolated using derived approximation formulas. To calculate installation costs (excavation and installation), the pipe costs (calculated based on Logstor data) were subtracted from the total costs.

Pipe costs in $\frac{EUR}{m}$ with DN as nominal diameter in mm:

Pipe costs are assumed to be the same for rural, suburban, and urban areas.

Total costs (pipe and installation cost, rural area, unpaved surfaces) in $\frac{EUR}{m}$ with DN as nominal diameter in mm:

Total costs (pipe and installation cost, suburban area, semi-paved surfaces) in $\frac{EUR}{m}$ with DN as nominal diameter in mm:

Total costs (pipe and installation cost, urban area, paved surfaces) in $\frac{EUR}{m}$ with DN as nominal diameter in mm:

Cost comparison: KWW technology catalog and feasibility study

The interpolated data from the KWW technology catalog was compared with that of a feasibility study for a city area in Frankfurt a. M. (Germany) from the year 2023. The cost data from the feasibility study for the installation of the heating network was available online at the end of 2024 and is based on offers obtained at the time from civil engineering companies as well as experience values from participating engineering offices and civil engineering companies. It is considered a good estimate for the costs of installing a heating network in an urban area.