Planning tool for buildings & districts

5GDHC network in Herne (Shamrockpark)

On this page you find facts and figures about the 5GDHC network in Herne (Shamrockpark). The network has a length of 2 km. In total, 24 buildings are supplied by the heat network. The 5GDHC network is operated by Shamrock Energie GmbH .

Facts and figures about the cold heat network in Herne (Shamrockpark)

Insulated steel pipes are used for the heating network. The network does not only supply the buildings with heat to operate the decentralized heat pumps, but also with cooling energy, e.g. for room air conditioning. If heating and cooling demands occur simultaneously, these can be balanced within the 5GDHC network (see also demand balancing in 5GDHC networks). The primary energy factor of the heat supply is 0.4. The share of new construction area in this district is 50 %. Buildings are obliged to connect to the heating network. Detailed data of the 5GDHC network in Herne (Shamrockpark) is listed in Table 1.

Your 5GDHC network is not yet listed on our overview page? Then help your district get more visibility by filling out our survey form.
Table 1: Facts and figures about the anergy network in Herne (Shamrockpark)
 
District Shamrockpark
Country Germany
City / location Herne
Year of commissioning 2023
Operator Shamrock Energie GmbH
Network temperatures 22/12 °C
Supplied buildings 24
Network length 2 km
Primary energy factor 0.4
Share of new building area 50 %
Heat generation capacity (energy hub) 3000 kW
Pipe type Steel pipe (insulated)
Heat sources Combined heat and power plant (CHP)
Waste heat (industry)
Waste heat (data center)
Cooling supply through thermal network Yes
Obligation to connect to network Yes
Owner of decentral heat pumps Heat network operator
Billing boundary for delivered heat Condenser of the heat pump (building side)
Price model for heat supply Energy price (€/kWh)
Capacity price (€/kW)
Price model for cold supply Energy price (€/kWh)
Capacity price (€/kW)
Buildings receiving compensation for heat feed-in No
You are planning a district with 5GDHC / anergy network? Test the nPro planning tool. It was developed especially for 5GDHC networks.

This might also interest you

nPro software

Plan your energy system with nPro!

Newsletter

We inform you about new tool features and services.